====> file REF_MASTER_FLAT_r_SDSS_1_1_normal_normal.fits (main) <==== SIMPLE = T / file does conform to FITS standard BITPIX = 8 / number of bits per data pixel NAXIS = 0 / number of data axes EXTEND = T / FITS dataset may contain extensions COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H DATE = '2011-07-08T17:08:17' / file creation date (YYYY-MM-DDThh:mm:ss UT) ORIGIN = 'ESO-PARANAL' / European Southern Observatory TELESCOP= 'VST ' / ESO Telescope Name INSTRUME= 'OMEGACAM' / Instrument used. OBJECT = 'FLAT,SKY' / Original target. RA = 197.5 / 13:10:00.0 RA (J2000) pointing (deg) DEC = -29.33333 / -29:19:59.9 DEC (J2000) pointing (deg) EQUINOX = 2000. / Standard FK5 (years) RADECSYS= 'FK5 ' / Coordinate reference frame MJD-OBS = 55745.935647385 / MJD start (2011-07-03T22:27:19.934) DATE-OBS= '2011-07-03T22:27:19.934' / Date of observation UTC = 80831. / 22:27:11.000 UTC at start (sec) LST = 45117.818 / 12:31:57.818 LST at start (sec) PI-COI = 'UNKNOWN ' / PI-COI name. OBSERVER= 'UNKNOWN ' / Name of observer. DATAMD5 = '81b0e6202b46404e66fe7c3b7e8f692e' / MD5 checksum PIPEFILE= 'r.OMEGA.2011-07-03T22:27:19.934_tpl_0000.fits' / no comment HIERARCH ESO OBS AIRM = 5. / Requested maximum airmass HIERARCH ESO OBS AMBI FWHM = 2. / Requested maximum seeing HIERARCH ESO OBS AMBI TRANS = '1PHO ' / Requested sky transparency HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID HIERARCH ESO OBS CONTAINER TYPE = 'U ' / Scheduling container type HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.11' / OBS Dictionary HIERARCH ESO OBS EXECTIME = 615 / Expected execution time HIERARCH ESO OBS GRP = '0 ' / linked blocks HIERARCH ESO OBS ID = 574335 / Observation block ID HIERARCH ESO OBS MOON DIST = 30 / Requested minimum angular distance HIERARCH ESO OBS MOON FLI = 1. / Requested maximum fractional lunar HIERARCH ESO OBS NAME = 'OMEGACAM_SkyFlat_Field30_ugriz' / OB name HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name HIERARCH ESO OBS PI-COI ID = 52038 / ESO internal PI-COI ID HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name HIERARCH ESO OBS PROG ID = '60.A-9038(A)' / ESO program identification HIERARCH ESO OBS START = '2011-07-03T22:13:44' / OB start time HIERARCH ESO OBS STREHLRATIO = 0. / Requested strehl ratio HIERARCH ESO OBS TARG NAME = 'Field30 ' / OB target name HIERARCH ESO OBS TPLNO = 5 / Template number within OB HIERARCH ESO OBS TWILIGHT = 0 / Requested twilight HIERARCH ESO OBS WATERVAPOUR = 0. / Requested water vapour HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO TEL AIRM END = 1.015 / Airmass at end HIERARCH ESO TEL AIRM START = 1.015 / Airmass at start HIERARCH ESO TEL ALT = 80.156 / Alt angle at start (deg) HIERARCH ESO TEL AMBI FWHM END = -1. / Seeing queried from ASM (arcsec) HIERARCH ESO TEL AMBI FWHM START = -1. / Seeing queried from ASM (arcsec) HIERARCH ESO TEL AMBI PRES END = 740.47 / Air pressure from ASM (hPa) HIERARCH ESO TEL AMBI PRES START = 740.47 / Air pressure from ASM (hPa) HIERARCH ESO TEL AMBI RHUM = 18. / Relative humidity from ASM (%) HIERARCH ESO TEL AMBI TAU0 = 0.000551 / Average coherence time (s) HIERARCH ESO TEL AMBI TEMP = 7.67 / Amb temp from ASM (deg C) HIERARCH ESO TEL AMBI WINDDIR = 21. / Wind direction (N=0 E=90) (deg) HIERARCH ESO TEL AMBI WINDSP = 12.31 / Wind speed from ASM (m/s) HIERARCH ESO TEL AZ = 301.119 / Az angle at start (deg) S=0,W=90 HIERARCH ESO TEL CHOP ST = F / True when chopping is active HIERARCH ESO TEL DATE = '2011-05-10T24:00:00.0' / TCS installation date HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID HIERARCH ESO TEL FOCU LEN = 14.497 / Focal length (m) HIERARCH ESO TEL FOCU SCALE = 14.267 / Focal scale (arcsec/mm) HIERARCH ESO TEL FOCU VALUE = 0.92 / M2 setting (mm) HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m) HIERARCH ESO TEL GEOLAT = -24.6251 / Tel geo latitute (+=North) (deg) HIERARCH ESO TEL GEOLON = -70.4027 / Tel geo longitude (+=East) (deg) HIERARCH ESO TEL ID = 'v 0.131+' / TCS version number HIERARCH ESO TEL MOON DEC = 13.15672 / 13:09:24.1 DEC (J2000) (deg) HIERARCH ESO TEL MOON RA = 134.806872 / 08:59:13.6 RA (J2000) (deg) HIERARCH ESO TEL OPER = 'I, Respiri' / Telescope Operator HIERARCH ESO TEL PARANG END = -63.145 / Parallactic angle at end (deg) HIERARCH ESO TEL PARANG START = -63.283 / Parallactic angle at start (deg) HIERARCH ESO TEL TARG ALPHA = 131000. / Alpha coordinate for the target HIERARCH ESO TEL TARG COORDTYPE = 'M ' / Coordinate type (M=mean A=apparen HIERARCH ESO TEL TARG DELTA = -292000. / Delta coordinate for the target HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Julian) HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity HIERARCH ESO TEL TH M1 TEMP = 8.37 / M1 superficial temperature (deg C) HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status HIERARCH ESO INS DATE = '2002-01-31' / Instrument release date (yyyy-mm-d HIERARCH ESO INS DID = 'ESO-VLT-DIC.OMEGACAM_ICS-0.8' / Data dictionary HIERARCH ESO INS FILT1 ID = 'PS4 ' / Filter unique id. HIERARCH ESO INS FILT1 NAME = 'r_SDSS ' / Filter name. HIERARCH ESO INS FILT1 NO = 2 / Pos 1-6=Mag.A 7-12=Mag.B 0=NO Filt HIERARCH ESO INS FILT1 SWSIM = F / If T, function is software simulat HIERARCH ESO INS ID = 'OMEGACAM/1.60' / Instrument ID. HIERARCH ESO INS MODE = 'IMAGING ' / Instrument mode used. HIERARCH ESO INS SENS1 ID = 'LCUR ' / sensor ID. HIERARCH ESO INS SENS1 NAME = 'Lamps current' / sensor common name. HIERARCH ESO INS SENS1 VAL = 0. / [A] Calibration Lamps Current HIERARCH ESO INS SENS2 ID = 'FCFLI ' / sensor ID. HIERARCH ESO INS SENS2 NAME = 'Flow Cooling Fluid IN of Ins' / sensor common na HIERARCH ESO INS SENS2 VAL = -23.94 / [l/min] Instr Cool. Fluid Flow IN HIERARCH ESO INS SENS3 ID = 'FCFLD ' / sensor ID. HIERARCH ESO INS SENS3 NAME = 'Diff flow Cooling Fluid of Ins' / sensor common HIERARCH ESO INS SENS3 VAL = -0.07 / [l/min] Instr Cool. Fluid Flow DIF HIERARCH ESO INS SHUT1 SWSIM = F / If T, function is software simulat HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation. HIERARCH ESO INS TEMP11 ID = 'TFS ' / Temperature sensor ID. HIERARCH ESO INS TEMP11 NAME = 'Temp. Filter System' / Temperature sensor name. HIERARCH ESO INS TEMP11 VAL = 8.3 / [DEG C] Filter system temperature HIERARCH ESO INS TEMP12 ID = 'TFCL1 ' / Temperature sensor ID. HIERARCH ESO INS TEMP12 NAME = 'Temp. FIERA Cooling Liquid IN' / Temperature sen HIERARCH ESO INS TEMP12 VAL = -18.1 / [DEG C] FIERA Cooling Liquid IN T HIERARCH ESO INS TEMP13 ID = 'TFCL2 ' / Temperature sensor ID. HIERARCH ESO INS TEMP13 NAME = 'Temp. FIERA Cooling Liquid OUT' / Temperature se HIERARCH ESO INS TEMP13 VAL = -19. / [DEG C] FIERA Cooling Liquid OUT T HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '1 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. END ===> xtension 1 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#65' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '1 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000591 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.01231741905212 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0524653917704169 / Standard deviation valu END ===> xtension 2 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#66' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '2 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.99999999999117 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.0026832818985 / Median value of master fl HIERARCH ESO QC MASTER FLAT STDEV = 0.0149869214766955 / Standard deviation valu END ===> xtension 3 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#67' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '3 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.0000000000162 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00222897529602 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0155017080142935 / Standard deviation valu END ===> xtension 4 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#68' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '4 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000726 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 0.997438848018646 / Median value of master HIERARCH ESO QC MASTER FLAT STDEV = 0.0206666966854201 / Standard deviation valu END ===> xtension 5 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#73' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '5 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000088 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00155591964722 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.013166695682812 / Standard deviation value END ===> xtension 6 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#74' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '6 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999959284 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00027346611023 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0123027277941316 / Standard deviation valu END ===> xtension 7 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#75' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '7 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.0000000000587 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00044071674347 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.00827483371896039 / Standard deviation val END ===> xtension 8 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#76' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '8 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999991124 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00138926506042 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0107679120134928 / Standard deviation valu END ===> xtension 9 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#81' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '9 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999995423 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00171113014221 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0146473090806201 / Standard deviation valu END ===> xtension 10 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#82' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '10 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000014633 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 0.999392509460449 / Median value of master HIERARCH ESO QC MASTER FLAT STDEV = 0.0116535603838727 / Standard deviation valu END ===> xtension 11 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#83' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '11 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999998117 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00106966495514 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.00925368970569764 / Standard deviation val END ===> xtension 12 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#84' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '12 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999998352 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00055837631226 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0101898295610588 / Standard deviation valu END ===> xtension 13 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#89' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '13 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999999396 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.01374411582947 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0579924333223024 / Standard deviation valu END ===> xtension 14 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#90' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '14 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000001757 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00237691402435 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0196532974594887 / Standard deviation valu END ===> xtension 15 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#91' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '15 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.99999999999897 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00363206863403 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.018398181701832 / Standard deviation value END ===> xtension 16 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#92' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '16 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999986486 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00420725345612 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0212187715524166 / Standard deviation valu END ===> xtension 17 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#69' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '17 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999990265 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00151526927948 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0161518014435533 / Standard deviation valu END ===> xtension 18 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#70' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '18 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000271 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00239431858063 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0159093564922524 / Standard deviation valu END ===> xtension 19 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#71' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '19 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000001415 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00249087810516 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0180981662522846 / Standard deviation valu END ===> xtension 20 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#72' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '20 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000484 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00704169273376 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0319242089192631 / Standard deviation valu END ===> xtension 21 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#77' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '21 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999987701 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00118863582611 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0150770222457696 / Standard deviation valu END ===> xtension 22 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#78' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '22 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000001503 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00079214572906 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.011739406543134 / Standard deviation value END ===> xtension 23 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#79' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '23 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999979613 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00138998031616 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0146849097111396 / Standard deviation valu END ===> xtension 24 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#80' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '24 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000289 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00117158889771 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0144265582369393 / Standard deviation valu END ===> xtension 25 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#85' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '25 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000455 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00000941753387 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0158454735496355 / Standard deviation valu END ===> xtension 26 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#86' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '26 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 0.999999999999233 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00054383277893 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0161706241916219 / Standard deviation valu END ===> xtension 27 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#87' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '27 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000002373 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00097179412842 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0178638215377326 / Standard deviation valu END ===> xtension 28 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#88' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '28 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000649 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.0016108751297 / Median value of master fl HIERARCH ESO QC MASTER FLAT STDEV = 0.0227014711117378 / Standard deviation valu END ===> xtension 29 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#93' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '29 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000036 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00287926197052 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0259002593849652 / Standard deviation valu END ===> xtension 30 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#94' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '30 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000414 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00342833995819 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0298862714092865 / Standard deviation valu END ===> xtension 31 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#95' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '31 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000175 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.0027174949646 / Median value of master fl HIERARCH ESO QC MASTER FLAT STDEV = 0.0253035110844319 / Standard deviation valu END ===> xtension 32 XTENSION= 'IMAGE ' / IMAGE extension BITPIX = -32 / number of bits per data pixel NAXIS = 2 / number of data axes NAXIS1 = 2048 / length of data axis 1 NAXIS2 = 4100 / length of data axis 2 PCOUNT = 0 / required keyword; must = 0 GCOUNT = 1 / required keyword; must = 1 EXTNAME = 'ESO_CCD_#96' / Extension name TELESCOP= 'VST ' / ESO Telescope Name HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL HIERARCH ESO TPL EXPNO = 1 / Exposure number within template HIERARCH ESO TPL ID = 'OMEGACAM_img_cal_skyflat' / Template signature I HIERARCH ESO TPL NAME = 'Sky flat fields' / Template name HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat HIERARCH ESO TPL PRESEQ = 'OMEGACAM_img_cal_skyflat.seq' / Sequencer script HIERARCH ESO TPL START = '2011-07-03T22:26:18' / TPL start time HIERARCH ESO TPL VERSION = '1.0 ' / Version of the template HIERARCH ESO DET BITS = 16 / Bits per pixel readout HIERARCH ESO DET CHIPS = 32 / # of chips in detector array HIERARCH ESO DET DATE = '2004-11-10' / Installation date HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction HIERARCH ESO DET EXP NO = 131 / Unique exposure ID number HIERARCH ESO DET EXP RDTTIME = 30.826 / image readout time HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type HIERARCH ESO DET EXP XFERTIM = 30.803 / image transfer time HIERARCH ESO DET FRAM ID = 1 / Image sequencial number HIERARCH ESO DET FRAM TYPE = 'Normal ' / Frame type HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id HIERARCH ESO DET NAME = 'ocmsci1 - ocmsci1' / Name of detector system HIERARCH ESO DET OUTPUTS = 32 / # of outputs HIERARCH ESO DET OUTREF = 0 / reference output HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start HIERARCH ESO DET READ CLOCK = 'mosaic read (ordered)' / Readout clock pattern u HIERARCH ESO DET READ MODE = 'normal ' / Readout method HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin HIERARCH ESO DET READ SPEED = 'normal ' / Readout speed HIERARCH ESO DET SHUT ID = 'OmegaCAM (Bonn) SE118' / Shutter unique identifi HIERARCH ESO DET SHUT TMCLOS = -0.804 / Time taken to close shutter HIERARCH ESO DET SHUT TMOPEN = -0.804 / Time taken to open shutter HIERARCH ESO DET SHUT TYPE = 'curtain ' / type of shutter HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode HIERARCH ESO DET TELE INT = 600. / Interval between two successive te HIERARCH ESO DET TELE NO = 103 / # of sources active HIERARCH ESO DET TLM1 END = 155.9 / Telemetry value at read completion HIERARCH ESO DET TLM1 ID = 'SE118 ' / ID of telemetry sensor HIERARCH ESO DET TLM1 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM1 START = 155.9 / Telemetry value at read start HIERARCH ESO DET TLM10 END = 0. / Telemetry value at read completion HIERARCH ESO DET TLM10 ID = 'SE8 ' / ID of telemetry sensor HIERARCH ESO DET TLM10 NAME = 'Cryostat Vacuum' / Description of telemetry para HIERARCH ESO DET TLM10 START = 0. / Telemetry value at read start HIERARCH ESO DET TLM2 END = 152.8 / Telemetry value at read completion HIERARCH ESO DET TLM2 ID = 'SE114 ' / ID of telemetry sensor HIERARCH ESO DET TLM2 NAME = 'Q -X -Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM2 START = 152.8 / Telemetry value at read start HIERARCH ESO DET TLM3 END = 152.7 / Telemetry value at read completion HIERARCH ESO DET TLM3 ID = 'SE314 ' / ID of telemetry sensor HIERARCH ESO DET TLM3 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM3 START = 152.7 / Telemetry value at read start HIERARCH ESO DET TLM4 END = 155.2 / Telemetry value at read completion HIERARCH ESO DET TLM4 ID = 'SE318 ' / ID of telemetry sensor HIERARCH ESO DET TLM4 NAME = 'Q -X +Y, Busboa' / Description of telemetry para HIERARCH ESO DET TLM4 START = 155.2 / Telemetry value at read start HIERARCH ESO DET TLM5 END = 147. / Telemetry value at read completion HIERARCH ESO DET TLM5 ID = 'SE132 ' / ID of telemetry sensor HIERARCH ESO DET TLM5 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM5 START = 147. / Telemetry value at read start HIERARCH ESO DET TLM6 END = 149.2 / Telemetry value at read completion HIERARCH ESO DET TLM6 ID = 'SE226 ' / ID of telemetry sensor HIERARCH ESO DET TLM6 NAME = 'Heaterboard -1Y' / Description of telemetry para HIERARCH ESO DET TLM6 START = 149.2 / Telemetry value at read start HIERARCH ESO DET TLM7 END = 149.3 / Telemetry value at read completion HIERARCH ESO DET TLM7 ID = 'SE326 ' / ID of telemetry sensor HIERARCH ESO DET TLM7 NAME = 'Heaterboard +1Y' / Description of telemetry para HIERARCH ESO DET TLM7 START = 149.3 / Telemetry value at read start HIERARCH ESO DET TLM8 END = 147.3 / Telemetry value at read completion HIERARCH ESO DET TLM8 ID = 'SE332 ' / ID of telemetry sensor HIERARCH ESO DET TLM8 NAME = 'Mosaicplate out' / Description of telemetry para HIERARCH ESO DET TLM8 START = 147.3 / Telemetry value at read start HIERARCH ESO DET TLM9 END = 273.1 / Telemetry value at read completion HIERARCH ESO DET TLM9 ID = 'SE7 ' / ID of telemetry sensor HIERARCH ESO DET TLM9 NAME = 'Reference Tempe' / Description of telemetry para HIERARCH ESO DET TLM9 START = 273.1 / Telemetry value at read start HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y HIERARCH ESO DET WIN1 DIT1 = 0.5 / actual subintegration time HIERARCH ESO DET WIN1 DKTM = 1.4798 / Dark current time HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations HIERARCH ESO DET WIN1 NX = 17152 / # of pixels along X HIERARCH ESO DET WIN1 NY = 16800 / # of pixels along Y HIERARCH ESO DET WIN1 ST = T / If T, window enabled HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y HIERARCH ESO DET WIN1 UIT1 = 0.5 / user defined subintegration time HIERARCH ESO DET WINDOWS = 1 / # of windows readout HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO HIERARCH ESO PRO CATG = 'MASTER_FLAT' / Category of pipeline product frame HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type HIERARCH ESO PRO TECH = 'IMAGE,JITTER' / Observation technique HIERARCH ESO PRO SCIENCE = F / Scientific product if T HIERARCH ESO PRO REC1 ID = 'omega_mflat' / Pipeline recipe (unique) identifier HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier HIERARCH ESO PRO REC1 PIPE ID = 'omega/0.8.12' / Pipeline (unique) identifier HIERARCH ESO PRO REC1 RAW1 NAME = 'OMEGA.2011-07-03T22:27:19.934.fits' / File na HIERARCH ESO PRO REC1 RAW1 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW2 NAME = 'OMEGA.2011-07-03T22:28:15.007.fits' / File na HIERARCH ESO PRO REC1 RAW2 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW3 NAME = 'OMEGA.2011-07-03T22:29:03.765.fits' / File na HIERARCH ESO PRO REC1 RAW3 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW4 NAME = 'OMEGA.2011-07-03T22:29:49.876.fits' / File na HIERARCH ESO PRO REC1 RAW4 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW5 NAME = 'OMEGA.2011-07-03T22:30:39.736.fits' / File na HIERARCH ESO PRO REC1 RAW5 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO REC1 RAW6 NAME = 'OMEGA.2011-07-03T22:31:31.296.fits' / File na HIERARCH ESO PRO REC1 RAW6 CATG = 'TWILIGHT_FLAT' / Category of raw frame HIERARCH ESO PRO DATANCOM = 6 / Number of combined frames HIERARCH ESO PRO REC1 CAL1 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL1 CATG = 'MASTER_BIAS' / Category of calibration frame HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'db9e0d3d9f64fc77507ed4ce0d62e058' / MD5 si HIERARCH ESO PRO REC1 CAL2 NAME = 'r.OMEGA.2011-07-04T08:20:57.082_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL2 CATG = 'HOT_PIXELS_MAP' / Category of calibration fra HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '91fc5a33e763456d3740c27505ed2272' / MD5 si HIERARCH ESO PRO REC1 CAL3 NAME = 'r.OMEGA.2011-07-04T05:12:50.868_tpl_0001.fit' HIERARCH ESO PRO REC1 CAL3 CATG = 'COLD_PIXELS_MAP' / Category of calibration fr HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '951a9c1792c70510d82e5c71fbc772ed' / MD5 si HIERARCH ESO PRO REC1 CAL4 NAME = 'r.OMEGA.2011-07-04T05:38:37.794_tpl_0000.fit' HIERARCH ESO PRO REC1 CAL4 CATG = 'MASTER_FLAT_DOME' / Category of calibration f HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '9c809d825bf02afb801cbc92d6e31bc5' / MD5 si HIERARCH ESO PRO REC1 PARAM1 NAME = 'ext ' / FITS extension number to load ( HIERARCH ESO PRO REC1 PARAM1 VALUE = '32 ' / Default: -1 HIERARCH ESO PRO REC1 PARAM2 NAME = 'oc-meth ' / Overscan Correction Method HIERARCH ESO PRO REC1 PARAM2 VALUE = '0 ' / Default: 0 HIERARCH ESO PRO REC1 PARAM3 NAME = 'paf ' / Boolean value to create PAF fil HIERARCH ESO PRO REC1 PARAM3 VALUE = 'true ' / Default: true HIERARCH ESO PRO REC1 PARAM4 NAME = 'sig-clip' / Sigma Clipping Threshold HIERARCH ESO PRO REC1 PARAM4 VALUE = '3 ' / Default: 3 HIERARCH ESO PRO REC1 PARAM5 NAME = 'bin-path' / Path to any external executable HIERARCH ESO PRO REC1 PARAM5 VALUE = '/home/quality/pipelines/omega-0.8.12/lib/' HIERARCH ESO PRO REC1 PARAM6 NAME = 'gau_filt_sz' / Standard deviation of Gaussi HIERARCH ESO PRO REC1 PARAM6 VALUE = '9 ' / Default: 9 HIERARCH ESO PRO REC1 PARAM7 NAME = 'mr_xpix ' / Width of X region for mirroring HIERARCH ESO PRO REC1 PARAM7 VALUE = '75 ' / Default: 75 HIERARCH ESO PRO REC1 PARAM8 NAME = 'mr_ypix ' / Width of Y region for mirroring HIERARCH ESO PRO REC1 PARAM8 VALUE = '150 ' / Default: 150 HIERARCH ESO PRO REC1 PARAM9 NAME = 'low ' / Low flagging threshold for cold HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.96 ' / Default: 0.96 HIERARCH ESO PRO REC1 PARAM10 NAME = 'high ' / High flagging threshold for co HIERARCH ESO PRO REC1 PARAM10 VALUE = '1.04 ' / Default: 1.04 HIERARCH ESO DRS OVERSCAN METHOD = 0 / overscan correction method HIERARCH ESO ADA ABSROT END = 116.77941 / Abs rot angle at exp end (deg) HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position HIERARCH ESO ADA ABSROT START = 116.65313 / Abs rot angle at exp start (deg) HIERARCH ESO ADA GUID STATUS = 'OFF ' / Status of autoguider HIERARCH ESO ADA POSANG = 0. / Position angle at start HIERARCH ESO OCS DET1 IMGNAME = 'OMEGACAM_IMG_FLAT' / Data File Name. HIERARCH ESO QC MASTER FLAT MEAN = 1.00000000000749 / Mean value of master flat HIERARCH ESO QC MASTER FLAT MEDIAN = 1.00696980953217 / Median value of master f HIERARCH ESO QC MASTER FLAT STDEV = 0.0353180304577254 / Standard deviation valu END