Plot
? |
Symb
? |
Source
* |
Average ? |
Thresholds ? |
N_
data |
QC1
parameter |
Data
downloads |
Remarks |
| method |
value |
unit |
method |
value |
| 1 |
• | QC1DB |
MEDIAN |
52.8 |
N |
none | |
2068 |
nlin_acc |
all (full time range)
| number of fitted lines, high-resolution grating HR; reference setting H525.8B, Medusa1 |
| 1 |
• | QC1DB |
none |
|
N |
none | |
47 |
nlin_acc |
all (full time range)
| same, initial years, from reprocessing |
| 2 |
x | QC1DB |
MEDIAN |
52.6 |
N |
none | |
2044 |
nlin_acc |
all (full time range)
| as plot 1, Medusa2 |
| 2 |
x | QC1DB |
none |
|
N |
none | |
56 |
nlin_acc |
all (full time range)
| same, initial years, from reprocessing |
| 3 |
∗ | QC1DB |
MEDIAN |
41.4 |
N |
none | |
941 |
nlin_acc |
all (full time range)
| as plot 1, IFU1 ((no reprocessing) |
| 4 |
▲ | QC1DB |
MEDIAN |
41.2 |
N |
none | |
955 |
nlin_acc |
all (full time range)
| as plot 1, IFU2 |
| 5 |
• | QC1DB |
MEDIAN |
44.7 |
N |
none | |
938 |
nlin_acc |
all (full time range)
| as plot 1, Argus |
|
| 6 |
• | QC1DB |
MEDIAN |
58.6 |
N |
none | |
2234 |
nlin_acc |
all (full time range)
| number of fitted lines, low-resolution grating LR; reference setting L543.1, Medusa1 |
| 6 |
• | QC1DB |
none |
|
N |
none | |
43 |
nlin_acc |
all (full time range)
| same, initial years, from reprocessing |
| 7 |
x | QC1DB |
MEDIAN |
58.5 |
N |
none | |
2240 |
nlin_acc |
all (full time range)
| ... same for Medusa2 |
| 7 |
• | QC1DB |
none |
|
N |
none | |
47 |
nlin_acc |
all (full time range)
| same, initial years, from reprocessing |
| |
|
*Data sources: QC1DB: QC1 database; LOCAL: local data source
|
Plot 1
scores: not implemented
| | data source: | giraffe_wave
(QC1 database) |
dataset:
(numbers below apply to this dataset) | nlin_acc | • |
| median: | 52.8 | N |
| thresholds: | none | |
| N_data plotted: | 2068 |
| [click plot for closeup] |
Plot 2
scores: not implemented
| | data source: | giraffe_wave
(QC1 database) |
dataset:
(numbers below apply to this dataset) | nlin_acc | x |
| median: | 52.6 | N |
| thresholds: | none | |
| N_data plotted: | 2044 |
| [click plot for closeup] |
Plot 3
scores:  3|
| | data source: | giraffe_wave
(QC1 database) |
| dataset: | nlin_acc | ∗ |
| median: | 41.4 | N |
| thresholds: | none | |
| N_data plotted: | 941 |
| [click plot for closeup] |
Plot 4
scores: 2|
| | data source: | giraffe_wave
(QC1 database) |
| dataset: | nlin_acc | ▲ |
| median: | 41.2 | N |
| thresholds: | none | |
| N_data plotted: | 955 |
| [click plot for closeup] |
Plot 5
scores: 2|
| | data source: | giraffe_wave
(QC1 database) |
| dataset: | nlin_acc | • |
| median: | 44.7 | N |
| thresholds: | none | |
| N_data plotted: | 938 |
| [click plot for closeup] |
Plot 6
scores: not implemented
| | data source: | giraffe_wave
(QC1 database) |
dataset:
(numbers below apply to this dataset) | nlin_acc | • |
| median: | 58.6 | N |
| thresholds: | none | |
| N_data plotted: | 2234 |
| [click plot for closeup] |
Plot 7
scores: not implemented
| | data source: | giraffe_wave
(QC1 database) |
dataset:
(numbers below apply to this dataset) | nlin_acc | x |
| median: | 58.5 | N |
| thresholds: | none | |
| N_data plotted: | 2240 |
| [click plot for closeup] |
This is the FULL plot for the
quality of the dispersion solution in the GIRAFFE
arclamp calibration data. We display here the QC1 parameter nlin_acc
which describes the average number of lines per fibre accepted for
the dispersion
solution. This plot monitors the
HC data taken in high resolution (H525.8B) and low resolution (L543.1, Medusa1
and 2 only).
Corresponding data from the GIRAFFE master calibration (re)processing project are available for the Medusa plots and marked separately.
The purpose of this plot is to monitor the ability of the pipeline to derive a
reasonable
wavelength solution.
Plots 1-5 show the HC settings for high resolution. Plots 6-7 show the HC
settings for the low resolution grating.
General information
Click on any of the plots to see a close-up version.
The latest date is indicated on top of the plot.
If configured,
- data points belonging to the latest date are specially marked
- statistical averages are indicated by a solid line, and thresholds by broken lines
- outliers are marked by a red asterisk. They are defined as data points outside the
threshold lines
- "aliens" (= data points outside the plot Y limits) are marked by a red arrow (↑ or ↓)
- you can download the data for each parameter set if the 'Data downloads' link shows up
|
