Plot ? |
Symb ? |
Source * |
Average ? |
Thresholds ? |
N_ data |
QC1 parameter |
Data downloads |
Remarks |
method |
value |
unit |
method |
value |
1 |
| QC1DB |
MEDIAN |
0.173 |
pix |
none | |
2026 |
rms_fit |
all (full time range)
| rms of fitted lines (pix); H525.8B, Medusa1 |
1 |
| QC1DB |
none |
|
pix |
none | |
20 |
rms_fit |
all (full time range)
| same, initial years, from reprocessing |
2 |
x | QC1DB |
MEDIAN |
0.173 |
pix |
none | |
2020 |
rms_fit |
all (full time range)
| as plot 1, Medusa2 |
2 |
x | QC1DB |
none |
|
pix |
none | |
18 |
rms_fit |
all (full time range)
| same, initial years, from reprocessing |
3 |
∗ | QC1DB |
MEDIAN |
0.123 |
pix |
none | |
962 |
rms_fit |
all (full time range)
| as plot 1, IFU1 (no reprocessing) |
4 |
▲ | QC1DB |
MEDIAN |
0.13 |
pix |
none | |
979 |
rms_fit |
all (full time range)
| as plot 1, IFU2 |
5 |
| QC1DB |
MEDIAN |
0.116 |
pix |
none | |
959 |
rms_fit |
all (full time range)
| as plot 1, Argus |
|
6 |
| QC1DB |
MEDIAN |
0.211 |
pix |
none | |
2297 |
rms_fit |
all (full time range)
| rms of fitted lines (pix); L543.1, Medusa1 |
6 |
| QC1DB |
none |
|
pix |
none | |
43 |
rms_fit |
all (full time range)
| same, initial years, from reprocessing |
7 |
x | QC1DB |
MEDIAN |
0.222 |
pix |
none | |
2308 |
rms_fit |
all (full time range)
| ... same for Medusa2 |
7 |
x | QC1DB |
none |
|
pix |
none | |
47 |
rms_fit |
all (full time range)
| same, initial years, from reprocessing |
|
*Data sources: QC1DB: QC1 database; LOCAL: local data source
|
Plot 1 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: (numbers below apply to this dataset) | rms_fit | |
median: | 0.173 | pix |
thresholds: | none | |
N_data plotted: | 2026 |
[click plot for closeup] |
Plot 2 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: (numbers below apply to this dataset) | rms_fit | x |
median: | 0.173 | pix |
thresholds: | none | |
N_data plotted: | 2020 |
[click plot for closeup] |
Plot 3 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: | rms_fit | ∗ |
median: | 0.123 | pix |
thresholds: | none | |
N_data plotted: | 962 |
[click plot for closeup] |
Plot 4 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: | rms_fit | ▲ |
median: | 0.13 | pix |
thresholds: | none | |
N_data plotted: | 979 |
[click plot for closeup] |
Plot 5 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: | rms_fit | |
median: | 0.116 | pix |
thresholds: | none | |
N_data plotted: | 959 |
[click plot for closeup] |
Plot 6 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: (numbers below apply to this dataset) | rms_fit | |
median: | 0.211 | pix |
thresholds: | none | |
N_data plotted: | 2297 |
[click plot for closeup] |
Plot 7 scores: not implemented
| data source: | giraffe_wave (QC1 database) |
dataset: (numbers below apply to this dataset) | rms_fit | x |
median: | 0.222 | pix |
thresholds: | none | |
N_data plotted: | 2308 |
[click plot for closeup] |
This plot
This is the FULL plot for the
quality of the dispersion solution in the GIRAFFE
arclamp calibration data. We display here the QC1 parameter rms_fit
(PRO.WSOL.RMS) which describes the rms of the residuals of the accepted line
positions against the dispersion
solution. This plot monitors the
HC data taken in high resolution (H525.8B) and low resolution (L543.1, Medusa1
and 2 only).
The arclamp has been replaced on 2013-04-20, since then rms_fit is slightly
higher than before.
Corresponding data from the GIRAFFE master calibration (re)processing project are available for the Medusa plots and marked separately.
Check the N_LINES plot of this group for the number of lines accepted for the
dispersion solution, and the RESOL plot for resolution monitoring.
General information
Click on any of the plots to see a close-up version.
The latest date is indicated on top of the plot.
If configured,
- data points belonging to the latest date are specially marked
- statistical averages are indicated by a solid line, and thresholds by broken lines
- outliers are marked by a red asterisk. They are defined as data points outside the
threshold lines
- "aliens" (= data points outside the plot Y limits) are marked by a red arrow (↑ or ↓)
- you can download the data for each parameter set if the 'Data downloads' link shows up
|