This is the instrument performance plot for the HAWKI detectors' median value across master dark.
QC parameter is derived for each detector from the raw dark frames. Only the "NonDest" readout mode is monitored.

On 2016-11-19 (blue vertical line) new CASU pipeline was adopted.

The reference value for each detector for monitore DET.DIT=2s and 300s is currently identical to the median of the measured values.

These plots describe:
Fig. 1. chip4: The QC parameter for DIT=2.0 for chip4. Reference value: -0.275 ADU
Fig. 2. chip3: The QC parameter for DIT=2.0 for chip #3. Reference value: -0.758 ADU
Fig. 3. chip4: The QC parameter for DIT=300.0 for chip #4. Reference value: 31.6 ADU
Fig. 4. chip3: The QC parameter for DIT=300.0 for chip #3. Reference value: 40.5 ADU
Fig. 5. chip1: The QC parameter for DIT=2.0 for chip #1. Reference value: 3.19 ADU
Fig. 6. chip2: The QC parameter for DIT=2.0 for chip #2. Reference value: -0.604 ADU
Fig. 7. chip1: The QC parameter for DIT=300.0 for chip #1. Reference value: 46.8 ADU
Fig. 8. chip2: The QC parameter for DIT=300.0 for chip #2. Reference value: 31.4 ADU