# File: /home/sinfoni/.esorex/sinfo_rec_wavecal.rc # # Note: This configuration file has been automatically # generated by the esorex (v3.6) program. # # Date: 08-Jan-2007 09:49:29 # # # --product-density # Density of pipeline products: 0 (low), 1 (med-QC), 2 (high-debug). This option # may also be set using the environment variable sinfoni.product.density. sinfoni.product.density=1 # --stack-lo_rej # lower rejection. This option may also be set using the environment variable # sinfoni.stacked.low_rejection. sinfoni.stacked.low_rejection=0.1 # --stack-hi_rej # higher rejection. This option may also be set using the environment variable # sinfoni.stacked.high_rejection. sinfoni.stacked.high_rejection=0.1 # --stack-flat_ind # Flat Index:. This option may also be set using the environment variable # sinfoni.stacked.flat_index. sinfoni.stacked.flat_index=TRUE # --stack-mask_ind # BP Mask Interpolation Switch: indicates if the bad pixel mask should be # applied (1) or not (0). This option may also be set using the environment # variable sinfoni.stacked.mask_index. sinfoni.stacked.mask_index=1 # --stack-ind_ind # indicates if the bad pixels should be indicated (yes) or interpolated (no). # This option may also be set using the environment variable # sinfoni.stacked.ind_index. sinfoni.stacked.ind_index=FALSE # --stack-mask_rad # Max distance bad-good pix:. This option may also be set using the environment # variable sinfoni.stacked.mask_rad. sinfoni.stacked.mask_rad=4 # --stack-gauss_ind # Gaussian Convolution Switch:. This option may also be set using the # environment variable sinfoni.stacked.gauss_index. sinfoni.stacked.gauss_index=FALSE # --stack-khw # Kernel Half Width. This option may also be set using the environment variable # sinfoni.stacked.kernel_half_width. sinfoni.stacked.kernel_half_width=2 # --stack-warpfix_ind # Warp Fix Index:. This option may also be set using the environment variable # sinfoni.stacked.warpfix_ind. sinfoni.stacked.warpfix_ind=TRUE # --stack-warpfix_kernel # Warpfix kernel:. This option may also be set using the environment variable # sinfoni.stacked.warpfix_kernel. sinfoni.stacked.warpfix_kernel=tanh # --stack-qc_thresh_min # qc_thresh_min. This option may also be set using the environment variable # sinfoni.stacked.qc_thresh_min. sinfoni.stacked.qc_thresh_min=0 # --stack-qc_thresh_max # qc_thresh_max. This option may also be set using the environment variable # sinfoni.stacked.qc_thresh_max. sinfoni.stacked.qc_thresh_max=49000 # --wcal-slitpos_bootstrap # Switch to get a new slitpos without a reference:. This option may also be set # using the environment variable sinfoni.wavecal.slitpos_boostrap. sinfoni.wavecal.slitpos_boostrap=TRUE # --wcal-calib_indicator # Calib Indicator: FALSE: if the dispersion relation is already known, the # routine can jump to the sinfo_waveMap section TRUE: if the dispersion # relation must first be determined. This option may also be set using the # environment variable sinfoni.wavecal.calib_indicator. sinfoni.wavecal.calib_indicator=TRUE # --wcal-min_diff # Minimum Of Difference: minimum difference of mean and sinfo_median column # intensity to carry out the cross sinfo_correlation. This option may also be # set using the environment variable sinfoni.wavecal.min_diff. sinfoni.wavecal.min_diff=1.0 # --wcal-hw # Half Width: half width of a box within which the line must be placed. This # option may also be set using the environment variable # sinfoni.wavecal.half_width. sinfoni.wavecal.half_width=7 # --wcal-sigma # Sigma: sigma of Gaussian which is convolved with the artificial spectrum # generated using the line list. This option may also be set using the # environment variable sinfoni.wavecal.sigma. sinfoni.wavecal.sigma=2.0 # --wcal-fwhm # FWHM: initial guess value for the fwhm of the Gaussian used for the line fit. # This option may also be set using the environment variable # sinfoni.wavecal.fwhm. sinfoni.wavecal.fwhm=2.83 # --wcal-min_amplitude # Minimum Of Amplitude: of the Gaussian to do the fit. This option may also be # set using the environment variable sinfoni.wavecal.min_amplitude. sinfoni.wavecal.min_amplitude=5.0 # --wcal-max_residual # Maximum Residuals value: beyond this value the fit is rejected. This option # may also be set using the environment variable # sinfoni.wavecal.max_residual. sinfoni.wavecal.max_residual=0.5 # --wcal-n_a_coeffs # Number of A coefficients: number of polynomial coefficients for the dispersion # relation. This option may also be set using the environment variable # sinfoni.wavecal.n_a_coefficients. sinfoni.wavecal.n_a_coefficients=4 # --wcal-n_b_coeffs # Number of B coefficients: number of polynomial coefficients for the polynomial # fit of the dispersion coefficients. This option may also be set using the # environment variable sinfoni.wavecal.n_b_coefficients. sinfoni.wavecal.n_b_coefficients=2 # --wcal-sigma_factor # Sigma Factor: Factor of the standard deviation of the polynomial coefficients # of the dispersion relation beyond which the coefficients are not used for # the fit. This option may also be set using the environment variable # sinfoni.wavecal.sigma_factor. sinfoni.wavecal.sigma_factor=1.5 # --wcal-wcoeff_ind # Write Coefficients Index: indicates if the coefficients should be written into # a file or not. This option may also be set using the environment variable # sinfoni.wavecal.write_coeffs_ind. sinfoni.wavecal.write_coeffs_ind=TRUE # --wcal-par_ind # Write Parameter Index: indicates if the fit parameters should be written into # a file or not. This option may also be set using the environment variable # sinfoni.wavecal.write_par_ind. sinfoni.wavecal.write_par_ind=TRUE # --wcal-pixel_dist # Minimal Slitlets's Distance in spectral direction. This option may also be set # using the environment variable sinfoni.wavecal.pixel_dist. sinfoni.wavecal.pixel_dist=15 # --wcal-pixel_tol # Pixel Tolerance: allowed pixel position tolerance between estimated and fitted # line position. This option may also be set using the environment variable # sinfoni.wavecal.pixel_tol. sinfoni.wavecal.pixel_tol=5.0 # --wcal-wave_map_ind # Wavelength Map Indicator: indicates if the wavelength calibration map should # be generated (TRUE) or not (FALSE). This option may also be set using the # environment variable sinfoni.wavecal.wave_map_ind. sinfoni.wavecal.wave_map_ind=FALSE # --wcal-mag_factor # Magnificator Factor: magnifying factor for the number of pixels in the columns # needed for FFT. This option may also be set using the environment variable # sinfoni.wavecal.mag_factor. sinfoni.wavecal.mag_factor=8 # --wcal-slit_pos_ind # Slit Position Indicator: indicates if the fits of the slitlet edge positions # should be carried through or not. This option may also be set using the # environment variable sinfoni.wavecal.slit_pos_indicator. sinfoni.wavecal.slit_pos_indicator=TRUE # --wcal-fit_boltz_ind # Fit Boltzmann Indicator: indicates if the fits of the slitlet edge positions # is carried trough by using a Boltzmann function as model function. This # option may also be set using the environment variable # sinfoni.wavecal.fit_boltz_indicator. sinfoni.wavecal.fit_boltz_indicator=TRUE # --wcal-fit_edge_ind # Fit Edge Indicator: indicates if the fits of the slitlet edge positions is # carried through by using a simple edge function as model function. This # option may also be set using the environment variable # sinfoni.wavecal.fit_edge_indicator. sinfoni.wavecal.fit_edge_indicator=FALSE # --wcal-estimate_ind # Estimate Indicator: indicates if the fits of the slitlet edge positions is # carried through by using a list of estimated guess positions in a file # (TRUE)or if the initial positions are calculated automatically (FALSE). The # estimation case is more stable. This option may also be set using the # environment variable sinfoni.wavecal.estimate_indicator. sinfoni.wavecal.estimate_indicator=FALSE # --wcal-box_len # Box Length: pixel length of the row box within which the fit is carried out. # This option may also be set using the environment variable # sinfoni.wavecal.box_length. sinfoni.wavecal.box_length=32 # --wcal-y_box # Y Box: half width of a small box in spectral direction within which the # maximal intensity pixel is searched. This option may also be set using the # environment variable sinfoni.wavecal.y_box. sinfoni.wavecal.y_box=5.0 # --wcal-diff_toll # Difference Tolearance: maximal tolerable difference of the resulting fit # positions of the slitlet edges with respect to the expected positions. This # option may also be set using the environment variable # sinfoni.wavecal.diff_tol. sinfoni.wavecal.diff_tol=2.0 # --wcal-qc_thresh_min # qc_thresh_min. This option may also be set using the environment variable # sinfoni.wavecal.qc_thresh_min. sinfoni.wavecal.qc_thresh_min=0 # --wcal-qc_thresh_max # qc_thresh_max. This option may also be set using the environment variable # sinfoni.wavecal.qc_thresh_max. sinfoni.wavecal.qc_thresh_max=49000 # # End of file