VLT Software

CCS-LCU

Maccon Driver

User Manual

Change Record

Issue/Rev.	Date	Section/Page affected	Reason/Initiation/Document/Remarks
1.0	27.10.1993		First Issue
2.0	03.03.1995	All	Converted from LaTeX to FrameMaker. Contents completely changed for new MAC4 hardware and mcon driver version 2.
2.1	14.07.1995	3.3.16: 3.3.18: 4.3, 4.4:	Updated all version-numbers and man-pages. New commands for MAC4-parameter <trt>. Some bits in status-words have changed. Changed installation parameters (bus-adresses instead of CPU-addresses, added irq-level)
2.2	27.02.1996	3.3.1: 3.3.15: 3.3.17: 3.3.18:	Updated all version numbers New command de_init New commands for encoder value interrupt Removed command for servo target radius Init bit in status words has changed

The information contained in this manual is intended to be used in the ESO VLT project by ESO and authorized external contractors only.

While every precaution has been taken in the development of the software and in the preparation of this documentation, ESO assumes no responsibility for errors or omissions, or for damage resulting from the use of the software or of the information contained herein.

M.Ziebell

G.Raffi

B.Gustafsson

Quadralay Corporation http://www.webworks.com Voice: (512) 719-3399 Fax: (512) 719-3606 sales@webworks.com