VLT mirror ready to be washed

One of the VLT´s 8.2-metre primary mirrors, already removed from its supporting cell, is about to be put in a special washing machine where its thin reflective aluminium layer will be removed by chemicals. This is the riskiest moment of the whole recoating process, because the large mirror, weighing 23 tonnes and only 17 cm thick is hanging from the 15 hooks of this special crane (12 hooks around the perimeter and three at the central hole). While in its cell, the primary mirror is protected by sophisticated anti-seismic devices but during this operation — intended to be as fast as possible — it is much more vulnerable. Here an engineer is controlling the movement of the washing chamber which will be positioned under the crane, in order to put the mirror inside its dish. The metal structures visible on the bottom of the mirror are the tops for the actuators of the active optics system. Since telescopes spend the night under the stars, the mirrors accumulate on their surfaces a certain amount of dirt which reduces the reflectivity and degrades the image. The VLT 8.2-metre primary mirrors are therefore recoated every 18 months.

Crédit:

ESO

À propos de l'image

Identification:paranal-1000594
Type:Photographique
Date de publication:15 octobre 2010 20:05
Taille:3840 x 2160 px

À propos de l'objet

Nom:Very Large Telescope
Type:Unspecified : Technology : Observatory : Telescope
Catégorie:Paranal

Image Formats

Grand JPEG
2,8 Mio
JPEG taille écran
200,9 Kio

Zoomable


Fonds d'écran

1024x768
268,5 Kio
1280x1024
437,0 Kio
1600x1200
645,7 Kio
1920x1200
779,1 Kio
2048x1536
1,1 Mio