# File: /home/sinfoni/.esorex/sinfo_rec_mdark.rc
#
# Note: This configuration file has been automatically
#       generated by the esorex (v3.6) program.
#
# Date: 08-Jan-2007 09:45:17
#
#

# --bp_noise-thresh_sigma_fct
# Threshold Sigma Factor: If the mean noise exceeds this threshold times the
# clean standard deviation of the clean mean the corresponding pixels are
# declared as bad. This option may also be set using the environment variable
# sinfoni.bp_noise.thresh_sigma_factor.
sinfoni.bp_noise.thresh_sigma_factor=10.0

# --bp_noise-lo_rej
# low_rejection: percentage of rejected low intensity pixels before averaging.
# This option may also be set using the environment variable
# sinfoni.bp_noise.low_rejection.
sinfoni.bp_noise.low_rejection=10.0

# --bp_noise-hi_rej
# high_rejection: percentage of rejected high intensity pixels before averaging.
# This option may also be set using the environment variable
# sinfoni.bp_noise.high_rejection.
sinfoni.bp_noise.high_rejection=10.0

# --dark-lo_rej
# lower rejection. This option may also be set using the environment variable
# sinfoni.dark.low_rejection.
sinfoni.dark.low_rejection=0.1

# --dark-hi_rej
# higher rejection. This option may also be set using the environment variable
# sinfoni.dark.high_rejection.
sinfoni.dark.high_rejection=0.1

# --dark-qc_ron_xmin
# qc_ron_xmin. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_xmin.
sinfoni.dark.qc_ron_xmin=1

# --dark-qc_ron_xmax
# qc_ron_xmax. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_xmax.
sinfoni.dark.qc_ron_xmax=2048

# --dark-qc_ron_ymin
# qc_ron_ymin. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_ymin.
sinfoni.dark.qc_ron_ymin=1

# --dark-qc_ron_ymax
# qc_ron_ymax. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_ymax.
sinfoni.dark.qc_ron_ymax=2048

# --dark-qc_ron_hsize
# qc_ron_hsize. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_hsize.
sinfoni.dark.qc_ron_hsize=4

# --dark-qc_ron_nsamp
# qc_ron_nsamp. This option may also be set using the environment variable
# sinfoni.dark.qc_ron_nsamp.
sinfoni.dark.qc_ron_nsamp=100

# --dark-qc_fpn_xmin
# qc_fpn_xmin. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_xmin.
sinfoni.dark.qc_fpn_xmin=1

# --dark-qc_fpn_xmax
# qc_fpn_xmax. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_xmax.
sinfoni.dark.qc_fpn_xmax=2047

# --dark-qc_fpn_ymin
# qc_fpn_ymin. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_ymin.
sinfoni.dark.qc_fpn_ymin=1

# --dark-qc_fpn_ymax
# qc_fpn_ymax. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_ymax.
sinfoni.dark.qc_fpn_ymax=2047

# --dark-qc_fpn_hsize
# qc_fpn_hsize. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_hsize.
sinfoni.dark.qc_fpn_hsize=2

# --dark-qc_fpn_nsamp
# qc_fpn_nsamp. This option may also be set using the environment variable
# sinfoni.dark.qc_fpn_nsamp.
sinfoni.dark.qc_fpn_nsamp=1000

#
# End of file