# File: /home/sinfoni/.esorex/sinfo_rec_mflat.rc # # Note: This configuration file has been automatically # generated by the esorex (v3.6) program. # # Date: 08-Jan-2007 09:48:05 # # # --bp_norm-s_factor # Threshold Sigma Factor: to remove the column intensity tilt only pixels which # lie within a defined noiselimit are used to fit a straight line. This # option may also be set using the environment variable # sinfoni.bp_norm.sigma_factor. sinfoni.bp_norm.sigma_factor=5.0 # --bp_norm-method_ind # Bad pixel Method Index1: median of nearest neighbors,2: absolute distances # check, 3: mean of nearest spectral neighbors. This option may also be set # using the environment variable sinfoni.bp_norm.method_index. sinfoni.bp_norm.method_index=1 # --bp_norm-fct # Factor: if |pixel - median| > factor * standard deviation -> then the pixel # value is replaced by the median of the 8 nearest neighbors. This option may # also be set using the environment variable sinfoni.bp_norm.factor. sinfoni.bp_norm.factor=10.0 # --bp_norm-it # Iterations: number of iterations to of median filtering to find bad pixel # clusters. This option may also be set using the environment variable # sinfoni.bp_norm.iterations. sinfoni.bp_norm.iterations=8 # --bp_norm-lo_rej # low_rejection: percentage of rejected low intensity pixels before averaging. # This option may also be set using the environment variable # sinfoni.bp_norm.low_rejection. sinfoni.bp_norm.low_rejection=0.1 # --bp_norm-hi_rej # high_rejection: percentage of rejected high intensity pixels before averaging. # This option may also be set using the environment variable # sinfoni.bp_norm.high_rejection. sinfoni.bp_norm.high_rejection=0.1 # --bp_norm-llx # llx: to compute image statistics on a rectangularzone of the image the # coordinates of the rectangle are needed:lower left x coordinate. This # option may also be set using the environment variable sinfoni.bp_norm.llx. sinfoni.bp_norm.llx=270 # --bp_norm-lly # lly: to compute image statistics on a rectangularzone of the image the # coordinates of the rectangle are needed:lower left y coordinate. This # option may also be set using the environment variable sinfoni.bp_norm.lly. sinfoni.bp_norm.lly=1000 # --bp_norm-urx # urx: to compute image statistics on a rectangularzone of the image the # coordinates of the rectangle are needed:upper right x coordinate. This # option may also be set using the environment variable sinfoni.bp_norm.urx. sinfoni.bp_norm.urx=310 # --bp_norm-ury # ury: to compute image statistics on a rectangularzone of the image the # coordinates of the rectangle are needed:upper right y coordinate. This # option may also be set using the environment variable sinfoni.bp_norm.ury. sinfoni.bp_norm.ury=1200 # --bp_norm-thr_ind # Threshold Index: indicator that indicates if the values beyond a threshold # deviation from the mean are flagged as bad pixels. This option may also be # set using the environment variable sinfoni.bp_norm.threshold_index. sinfoni.bp_norm.threshold_index=TRUE # --bp_norm-mean_fct # Mean Factor: factor to the clean standard deviation to define the threshold # deviation from the clean mean. This option may also be set using the # environment variable sinfoni.bp_norm.mean_factor. sinfoni.bp_norm.mean_factor=100.0 # --bp_norm-min_cut # the minimum value of real data. This option may also be set using the # environment variable sinfoni.bp_norm.min_cut. sinfoni.bp_norm.min_cut=0.0 # --bp_norm-max_cut # the minimum value of real data. This option may also be set using the # environment variable sinfoni.bp_norm.max_cut. sinfoni.bp_norm.max_cut=5e+04 # --lamp_flats-lo_rej # lower rejection: percentage of rejected low intensity pixels before averaging. # This option may also be set using the environment variable # sinfoni.lamp_flats.low_rejection. sinfoni.lamp_flats.low_rejection=0.1 # --lamp_flats-hi_rej # high rejection: percentage of rejected high intensity pixels before averaging. # This option may also be set using the environment variable # sinfoni.lamp_flats.high_rejection. sinfoni.lamp_flats.high_rejection=0.1 # --lamp_flats-interpol_index # Interpolation index switch: indicator if the bad pixels of the flatfield # should be interpolated. This option may also be set using the environment # variable sinfoni.lamp_flats.interpol_index. sinfoni.lamp_flats.interpol_index=FALSE # --lamp_flats-max_rad # Max Rad: maximal pixel distance from bad pixel to take valid pixels. This # option may also be set using the environment variable # sinfoni.lamp_flats.max_rad. sinfoni.lamp_flats.max_rad=4 # --lamp_flats-bad_ind # indicator if a bad pixel mask should be generated or not. This option may also # be set using the environment variable sinfoni.lamp_flats.bad_ind. sinfoni.lamp_flats.bad_ind=FALSE # --lamp_flats-sigma_factor # Sigma Factor: factor of the sigma noise limit; to remove the column intensity # tilt only pixels which lie within a defined noise limit are used to fit a # straight line. This option may also be set using the environment variable # sinfoni.lamp_flats.sigma_factor. sinfoni.lamp_flats.sigma_factor=5.0 # --lamp_flats-factor # Factor: if |pixel - median| > factor * standard deviation -> then the pixel # value is replaced by the median of the 8 nearest neighbors. This option may # also be set using the environment variable sinfoni.lamp_flats.factor. sinfoni.lamp_flats.factor=3.0 # --lamp_flats-iterations # Iterations: number of iterations to of median filtering to find bad pixel # clusters. This option may also be set using the environment variable # sinfoni.lamp_flats.iterations. sinfoni.lamp_flats.iterations=8 # --lamp_flats-bad_lo_rej # low rejection: Percentage for bad pixel low rejection. This option may also be # set using the environment variable sinfoni.lamp_flats.bad_low_rejection. sinfoni.lamp_flats.bad_low_rejection=10.0 # --lamp_flats-bad_hi_rej # high rejection: Percentage for bad pixel high rejection. This option may also # be set using the environment variable # sinfoni.lamp_flats.bad_high_rejection. sinfoni.lamp_flats.bad_high_rejection=10.0 # --lamp_flats-llx # Lower Lext X corner. This option may also be set using the environment # variable sinfoni.lamp_flats.llx. sinfoni.lamp_flats.llx=1350 # --lamp_flats-lly # Lower Lext Y corner. This option may also be set using the environment # variable sinfoni.lamp_flats.lly. sinfoni.lamp_flats.lly=1000 # --lamp_flats-rrx # Upper right X corner. This option may also be set using the environment # variable sinfoni.lamp_flats.urx. sinfoni.lamp_flats.urx=1390 # --lamp_flats-ury # Upper right Y corner. This option may also be set using the environment # variable sinfoni.lamp_flats.ury. sinfoni.lamp_flats.ury=1200 # --lamp_flats-tresh_ind # Treshold index:. This option may also be set using the environment variable # sinfoni.lamp_flats.thresh_ind. sinfoni.lamp_flats.thresh_ind=FALSE # --lamp_flats-mean_factor # Mean Factor: factor to the clean standard deviation to define the threshold # deviation from the clean mean. This option may also be set using the # environment variable sinfoni.lamp_flats.mean_factor. sinfoni.lamp_flats.mean_factor=10.0 # --lamp_flats-qc_fpn_xmin1 # qc_fpn_xmin1. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_xmin1. sinfoni.lamp_flats.qc_fpn_xmin1=512 # --lamp_flats-qc_fpn_xmax1 # qc_fpn_xmax1. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_xmax1. sinfoni.lamp_flats.qc_fpn_xmax1=1536 # --lamp_flats-qc_fpn_ymin1 # qc_fpn_ymin1. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_ymin1. sinfoni.lamp_flats.qc_fpn_ymin1=512 # --lamp_flats-qc_fpn_ymax1 # qc_fpn_ymax1. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_ymax1. sinfoni.lamp_flats.qc_fpn_ymax1=1536 # --lamp_flats-qc_fpn_xmin2 # qc_fpn_xmin2. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_xmin2. sinfoni.lamp_flats.qc_fpn_xmin2=1350 # --lamp_flats-qc_fpn_xmax2 # qc_fpn_xmax2. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_xmax2. sinfoni.lamp_flats.qc_fpn_xmax2=1390 # --lamp_flats-qc_fpn_ymin2 # qc_fpn_ymin2. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_ymin2. sinfoni.lamp_flats.qc_fpn_ymin2=1000 # --lamp_flats-qc_fpn_ymax2 # qc_fpn_ymax2. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_fpn_ymax2. sinfoni.lamp_flats.qc_fpn_ymax2=1200 # --lamp_flats-qc_thresh_min # qc_thresh_min. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_thresh_min. sinfoni.lamp_flats.qc_thresh_min=0 # --lamp_flats-qc_thresh_max # qc_thresh_max. This option may also be set using the environment variable # sinfoni.lamp_flats.qc_thresh_max. sinfoni.lamp_flats.qc_thresh_max=49000 # # End of file