Instrument: FAINT OBJECT SPECTROGRAPH Revised: 10-MAY-94
File Type: UNIQUE DATA LOG
SIMPLE = F image conforms to the fits standard L1
BITPIX = 16 bits per data value I2
DATATYPE= UNSIGNED*2 datatype of the array C10
NAXIS = 1 number of data axes I2
NAXIS1 = 965 length of 1st data axis I2
GROUPS = T image is in group format L1
GCOUNT = 1 number of groups I2
PCOUNT = 3 number of group parameters I2
PSIZE = 128 bits in the group parameter block I2
/ GROUP PARAMETERS: OSS
PTYPE1 = FILLCNT number of segments containing fill C08
PDTYPE1 = INTEGER*4 C18
PSIZE1 = 32 I2
PTYPE2 = ERRCNT number of segments containing errors C08
PDTYPE2 = INTEGER*4 C18
PSIZE2 = 32 I2
PTYPE3 = PKTTIME time from the packet ancillary data C08
PDTYPE3 = REAL*8 (Modified Julian Date) C18
PSIZE3 = 64 I2
/ FOS DATA DESCRIPTOR KEYWORDS
INSTRUME= FOS instrument in use C04
ROOTNAME= rootname of the observation set C12
FILETYPE= UDL file type C03
CTYPE1 = UNITLESS units of first data axis C10
/ STATISTICAL KEYWORDS
DATE = date this file was written (dd/mm/yy) C08
/ CDBS KEYWORDS
Y1STCHNL= first channel to be processed I4
YAPERPO1= same as first YAPERHOE|LOE I4
YAQMD = acquisition mode I4 master
YDATALIM= high byte of acquisition limit I4 master
YDEAD = accum close time I4
YFFCPWR = flat field cal lamp power I4
YFGWAPO1= same as first YFGWAPOS I4
YINTEG = number of integrations/X-step I4
YLINSFRM= lines per frame I4
YLIVE = accum open time I4
YMCLEARS= memory clears/data acquisition I4
YMSLICES= number of memory slices I4
YNOISELM= burst noise rejection limit I4
YNUMCHNL= number of channels to be processed I4
YOVRSCAN= X-deflection overscan I4
YPLRZPO1= same as first YPLZRHOE|LOE I4
YPTRNS = patterns per readout I4
YRANGE = Y range I4
YREADCYC= readouts/memory clear I4
YWRDSLIN= words per line I4
YXBASE = X-deflection base I4
YXPITCH = X-deflection pitch between diode I4
YXSTEPS = X-deflection sub-steps I4
YYBASE = Y-deflection base I4
YYINDFHY= do deflection hyst. at begin. of data acqn. I4 master
YYPATH = path identification I4 master
YYPITCH = Y-deflection pitch I4
YYSTEPS = Y-deflection sub-steps I4
/ TARGET & PROPOSAL ID
TARGNAME= proposer's target name C30 exp
RA_TARG = right ascension of the target (deg) (J2000) R8 exp
DEC_TARG= declination of the target (deg) (J2000) R8 exp
PROPOSID= PEP proposal identifier I4 all
PEP_EXPO= PEP exposure identifier including sequence C15 all
LINENUM = PEP proposal line number C15 exp
SEQLINE = PEP line number of defined sequence C15 exp
SEQNAME = PEP define/use sequence name C15 exp
END
