Instrument: HIGH SPEED PHOTOMETER Revised: 25-AUG-93 File Type: AREA SCAN HEADER SIMPLE = F image conforms to the fits standard L1 BITPIX = 32 bits per data value I2 DATATYPE= REAL*4 datatype of the array C10 NAXIS = 2 number of data axes I2 NAXIS1 = length of 1st data axis I4 NAXIS2 = length of 2nd data axis I4
GROUPS = T image is in group format L1
GCOUNT = 1 number of groups I2
PCOUNT = 18 number of group parameters I2
PSIZE = 768 bits in the group parameter block I2
/ GROUP PARAMETERS: OSS
PTYPE1 = CRVAL1 right ascension of reference pixel (deg) C08
PDTYPE1 = REAL*8 C18
PSIZE1 = 64 I2 PTYPE2 = CRVAL2 declination of reference pixel (deg) C08 PDTYPE2 = REAL*8 C18 PSIZE2 = 64 I2 PTYPE3 = CRPIX1 x-coordinate of reference pixel C08 PDTYPE3 = REAL*4 C18 PSIZE3 = 32 I2 PTYPE4 = CRPIX2 y-coordinate of reference pixel C08 PDTYPE4 = REAL*4 C18 PSIZE4 = 32 I2
PTYPE5 = CD1_1 partial of the right ascension w.r.t. x C08 PDTYPE5 = REAL*4 C18 PSIZE5 = 32 I2 PTYPE6 = CD1_2 partial of the right ascension w.r.t. y C08 PDTYPE6 = REAL*4 C18 PSIZE6 = 32 I2 PTYPE7 = CD2_1 partial of the declination w.r.t. x C08 PDTYPE7 = REAL*4 C18 PSIZE7 = 32 I2 PTYPE8 = CD2_2 partial of the declination w.r.t. y C08
PDTYPE8 = REAL*4 C18 PSIZE8 = 32 I2 PTYPE9 = DATAMIN the minimum value of the data C08 PDTYPE9 = REAL*4 C18 PSIZE9 = 32 I2 PTYPE10 = DATAMAX the maximum value of the data C08 PDTYPE10= REAL*4 C18 PSIZE10 = 32 I2 PTYPE11 = MIR_REVR is the image mirror reversed C08 PDTYPE11= LOGICAL*4 C18
PSIZE11 = 32 I2 PTYPE12 = ORIENTAT the orientation of the image (deg) C08 PDTYPE12= REAL*4 C18 PSIZE12 = 32 I2 PTYPE13 = FILLCNT number of segments containing fill C08 PDTYPE13= INTEGER*4 C18 PSIZE13 = 32 I2 PTYPE14 = ERRCNT number of segments containing errors C08 PDTYPE14= INTEGER*4 C18 PSIZE14 = 32 I2
PTYPE15 = FPKTTIME the time of the first packet C08 PDTYPE15= REAL*8 (Modified Julian Date) C18 PSIZE15 = 64 I2 PTYPE16 = LPKTTIME the time of the last packet C08 PDTYPE16= REAL*8 (Modified Julian Date) C18 PSIZE16 = 64 I2 PTYPE17 = CTYPE1 the first coordinate type C08 PDTYPE17= CHARACTER*8 C18 PSIZE17 = 64 I2 PTYPE18 = CTYPE2 the second coordinate type C08
PDTYPE18= CHARACTER*8 C18
PSIZE18 = 64 I2
/ HSP DATA DESCRIPTOR KEYWORDS
INSTRUME= HSP instrument in use C04 exp
ROOTNAME= rootname of the observation set C12 master
FILETYPE= shp, udl, dst, dsk, ast, ask, asd, asa C03
BUNIT = COUNTS brightness units: COUNTS or DN (analog data) C18
/ CALIBRATION FLAGS AND INDICATORS
MODE = instrument mode SCP, SSP, ARS C03 master
DETECTOB= detector in use (0-5) - object data I2 master
APERTOBJ= aperture in use - object data C10 master
/ GENERIC CONVERSION KEYWORDS
DATA_TYP= data type: digital, analog C07
DATA_SRC= AREA SCAN data source: star, sky, area scan C09
DATA_FMT= data format: byte, word, lwrd, alog, all C04
/ CALIBRATION KEYWORDS
WORDS = number of HSP words samples in a line I2
LINES = number of lines in a group I4
INT_TIME= time of integration (in 1/1.024 microseconds) I4
TIMEBIAS= instrument time bias (in 1/1.024 microseconds) I4
SAMPTIME= time of integration (in seconds) R4 master
DELAY = delay between integrations (seconds) R4 master
BDEXPFLG= bus director expander flag I2 master
/ STATISTICAL KEYWORDS
DATE = date this file was written (dd/mm/yy) C08
PODPSFF = 0=(no podps fill); 1=(podps fill present) I2
STDCFFF = 0=(no st dcf fill); 1=(st dcf fill present) I2
STDCFFP = st dcf fill pattern (hex) C04
/ APERTURE POSITION
RA_APER = right ascension of the aperture (deg) R8 master
DEC_APER= declination of the aperture (deg) R8 master
/ EXPOSURE INFORMATION
EQUINOX = J2000 equinox of the celestial coordinate system C08 exp
SUNANGLE= angle between sun and V1 axis (deg) R4 exp
MOONANGL= angle between moon and V1 axis (deg) R4 exp
SUN_ALT = altitude of the sun above Earth's limb (deg) R4 exp
FGSLOCK = commanded FGS lock (FINE,COARSE,GYROS,UNKNOWN) C07 exp
DATE-OBS= UT date of start of observation (dd/mm/yy) C08 exp
TIME-OBS= UT time of start of observation (hh:mm:ss) C08 exp
EXPSTART= exposure start time (Modified Julian Date) R8 exp+ma
EXPEND = exposure end time (Modified Julian Date) R8 exp
EXPTIME = exposure duration (seconds)--calculated R4 exp+ma
EXPFLAG = Exposure interruption indicator C13 exp
/ TARGET & PROPOSAL ID
TARGNAME= proposer's target name C30 exp
RA_TARG = right ascension of the target (deg) (J2000) R8 exp
DEC_TARG= declination of the target (deg) (J2000) R8 exp
PROPOSID= PEP proposal identifier I4 all
PEP_EXPO= PEP exposure identifier including sequence C15 all
LINENUM = PEP proposal line number C15 exp
SEQLINE = PEP line number of defined sequence C15 exp
SEQNAME = PEP define/use sequence name C15 exp
END
Updated: 05/29/96 04:42
