Instrument: WIDEFIELD PLANETARY CAMERA II Revised: 6-DEC-93 File Type: EXTRACTED ENGINEERING DATA SIMPLE = F data conforms to the fits standard L1 BITPIX = 16 bits per data value I2 DATATYPE= INTEGER*2 datatype of the group array C10 NAXIS = 2 number of data axes I2 NAXIS1 = 14 length of 1st data axis I2 NAXIS2 = length of 2nd data axis I2
GROUPS = T data has groups L1
GCOUNT = 1 number of groups per observation (1-4) I2
PCOUNT = 3 number of parameters I2
PSIZE = 96 bits in each parameter block I2
/ GROUP PARAMETERS: OSS
PTYPE1 = FILLCNT number of segments containing fill C08
PDTYPE1 = INTEGER*4 C18
PSIZE1 = 32 I2
PTYPE2 = ERRCNT number of segments containing errors C08
PDTYPE2 = INTEGER*4 C18
PSIZE2 = 32 I2
/ GROUP PARAMETERS: PODPS
PTYPE3 = DETECTOR the ccd number of the data C08
PDTYPE3 = INTEGER*4 C18
PSIZE3 = 32 I4
/ WFPC-II DATA DESCRIPTOR KEYWORDS
INSTRUME= WFPC2 instrument in use C06
ROOTNAME= rootname of the observation set C12
FILETYPE= EXT shp, ext, edq, sdq, sci C03
CTYPE1 = UNITLESS unitless, line, pixel, channel, sample, time C08
CTYPE2 = LINE unitless, line, pixel, channel, sample, time C08
/ CALIBRATION FLAGS AND INDICATORS
MODE = instr. mode: FULL (full res.), AREA (area int.) C04
FILTER1 = first filter number (0-48) I2
FILTER2 = second filter number (0-48) I2
FILTROT = partial filter rotation angle (degrees) R4
/ CALIBRATION KEYWORDS
LINEBEG = 1 line number (1st line: wrt source format) I2
SAMPBEG = 1 sample number (1st sample: wrt source format) I2
/ STATISTICAL KEYWORDS
DATE = date this file was written (dd/mm/yy) C08
PODPSFF = 0=(no podps fill); 1=(podps fill present) I2
STDCFFF = 0=(no st dcf fill); 1=(st dcf fill present) I2
STDCFFP = st dcf fill pattern (hex) C04
/ TARGET & PROPOSAL ID
TARGNAME= proposer's target name C30 exp
RA_TARG = right ascension of the target (deg) (J2000) R8 exp
DEC_TARG= declination of the target (deg) (J2000) R8 exp
PROPOSID= PEP proposal identifier I4 all
PEP_EXPO= PEP exposure identifier including sequence C15 all
LINENUM = PEP proposal line number C15 exp
SEQLINE = PEP line number of defined sequence C15 exp
SEQNAME = PEP define/use sequence name C15 exp
END
Updated: 05/29/96 04:42
