MIDAS Commands

A full description of the echelle commands is given in the Appendix D. We include here a brief summary for quick reference. The echelle package is hierarchically organised from low-level commands (level 0) to high-level commands (level 3). The organization is a result of the following classification:

• Level 0.
  Apart from the level 0 command LOAD/ECHELLE, the user will make seldom use of level 0 commands. All parameters of these commands must be provided on the command line. The user may use these commands to benefit from options non available from higher level commands.
• Level 1.
  Level 1 commands perform the individual steps of the reduction. Parameters may be provided on the command line (thus updating the echelle keywords) or will be read from the echelle keywords (set by command SET/ECHELLE). Level 1 command enable to check individual steps of the reduction.
• Level 2.
  Level 2 commands perform high level steps of the reduction. The level 2 set of commands is self-consistent and enables to perform a complete reduction, with the optional use of verification lower level commands PLOT/ECHELLE, PLOT/IDENT, LOAD/IDENT, PLOT/RESIDUAL, LOAD/ECHELLE. Apart from method keywords and input/output images, no parameter value is required on the command line, all keywords being updated by INIT/ECHELLE and SET/ECHELLE commands.
• Level 3.
  The higher level 3 includes only two very general commands. The SET/CONTEXT initializes echelle keyword values and TUTORIAL/ECHELLE provides a demonstration of the package.

 

 

CALIBRATE/ECHELLE [defmtd] [wlcmtd]

FLAT/ECHELLE [flat] [correct] [blazeff]

FILTER/ECHELLE input output

PREPARE/WINDOW catalog flatbkg lhcuts

RESPONSE/ECHELLE [std] [fluxtab] [response]

REPEAT/ECHELLE [scalx,scaly] [response]

REDUCE/ECHELLE input output [bkcor]

ROTATE/ECHELLE catalog root-name [mode]

SELECT/BACKGROUND [all]

SCAN/ECHELLE frame [scan-par] 2|c|Session manager commands

HELP/ECHELLE [param]

INIT/ECHELLE [name]

SAVE/ECHELLE name

SET/ECHELLE par=value SHOW/ECHELLE

 

BACKGROUND/SMOOTH input output [radx,rady] [niter] [visu]

BACKGROUND/ECHELLE in out [radx,rady,step] [degree] [smooth] [method]

DEFINE/ECHELLE [ordref] [width1,thres1,slope] [defmtd] [defpol]

DEFINE/HOUGH [ordref] [nbord] [hwid] [hough_par] [thresh] [degx,degy] [hot_thres,step]

DEFINE/SKY ima [nsky] [possky] [half-width]

EXTRACT/ECHELLE input output slit[,offset] [method]

EXTRACT/SKY in out [mode] LOAD/IDENTIFICATIONS

MERGE/ECHELLE input output [params] [method]

IDENTIFY/ECHELLE [wlc] [lincat] [dc] [tol] [wlcloop] [wlcmtd] [guess]

PLOT/ECHELLE frame [ord1,ord2] [printer]

PLOT/IDENT frame [ord1,ord2] [printer]

PLOT/RESIDUALS [ord1,ord2]

PLOT/SPECTRUM in [start,end]

REBIN/ECHELLE input output [sample]

RIPPLE/ECHELLE input output [params] [method] [option]

SEARCH/ECHELLE input [width2,thres2]

SUBTRACT/BACKGR input backgr output [bkgmtd] [bkgvisu]

 

AVERAGE/TABLE frame table columns outcol rad (No on-line help)

EXTRACT/ORDER in out slit,angle,offset meth table coeffs [ord1,ord2] (No on-line help) EXTRACT/OPTIMAL

HOUGH/ECHELLE input [scan] [step,nbtr] [nbord] [flags] [hwid] [thres] LOAD/ECHELLE

PREPARE/BACKGROUND input [step] [init] [back_tab] [order_tab] [descr]

REGRESSION/ECHELLE [defpol] [niter] [absres] [kappa]

SEARCH/ORDER [ordref] [w,t,s] [outtab] [defmtd]

VERIFY/ECHELLE file [type]